Scroll through this page for illustrations of fire, water, and wear resistance ‘tests’

This test is not an official or independent test. It was set
up by ourselves to illustrate the real advantage RoofKrete
has over petrochemical membranes.

The flame made a point on the sample glow red hot for
an hour. No damage could be observed while the sample
was under the flame and no damage, apart from
surface discolouration at the hottest point, was apparent when
the sample had cooled. Please go the the test report page
for independent heat tests by Portsmouth University 

This test is not an official or independent test. It was set
up by ourselves to illustrate the real advantage RoofKrete
has over petrochemical membranes.

A container was constructed out of RoofKrete System 4 material.
This container was put on a flame and filled with water. The
 water was allowed to boil for three hours with constant
topping up to allow for evaporation. After the test there was
 no apparent damage to the sides or bottom of the container.
 

 This test is an everyday situation for a RoofKrete Membrane.

RoofKrete System 4 can withstand wear from metal tables and chairs,
 plant pots, planters and heavy pedestrian traffic. If on occasion RoofKrete
 does sustain any damage the damaged section can be cut out and
easily repaired to the original specification 

Back to top

[Home] [Problems Solved] [Product Applications] [Cost Effectiveness] [Total Encapsulation] [Fireproof test] [Test Reports] [Case Study] [Compare Membranes] [Environmental] [Millennium Products] [Green Roof] [Gridshell] [Explanation] [Contact]